怎么樣才能使橋架制作更簡單

怎么樣才能使橋架制作更簡單

今天與大家介紹四步走完成橋架彎頭制作全過程：
一、首先確認橋架的規格、做什么樣的彎頭、做什么樣的度數的（注意：橋架規格有很多，做的角度不同，它的下料距離也還是不同的）
橋架的規格，長度一般是兩米，比如200*100，400*200的，200*100中的200代表的是橋架的寬度，100代表的橋架的邊高，
二、計算出下料距離（不能計算錯誤）
比如規格是400*200做45度的水平彎頭，邊高是20、寬是40，那就可以根據公式計算出來。
三、畫出要切割的線、切割
平時要多動手，可以拿起盒子和紙皮模擬切割，演示水平彎頭的切法。
四、合并上螺絲，成品
每一步都是經典、每一步都不能出錯。
How can we make the bridge more simple

Today, I'd like to introduce the whole process of four-step bridge elbow production:

1. First, confirm the specification of the bridge frame, the bend made and the degree made.

The length of the bridge frame is usually two meters, for example, 200*100, 400*200, 200 of 200*100 represents the width of the bridge frame, and 100 represents the height of the side of the bridge frame.

2. Calculate the feeding distance (cannot calculate the error)

For example, if the specification is 400*200 and the horizontal bend is 45 degrees, the side height is 20 and the width is 40, then it can be calculated according to the formula.

Draw lines and cut

To do more work, you can pick up the box and paper to simulate cutting, and demonstrate the cutting method of horizontal bend.

4. Combine screws and finished products

Every step is classic and every step can't be wrong.