電纜橋架安裝存在的問題

電纜橋架安裝存在的問題
一、電纜橋架的拖臂一般是在橋架廠家用焊接的方式實現，當前寸土寸金的時代，這樣就造成焊接好的橋架存儲占用大量的面積，無形中提高
了電纜橋架成本，并且在運輸、搬運過程中容易造成損壞。
二、電纜橋架是成套在電纜橋架廠家國定好的，雖然之前已經在現場測量計算了，但如果在現場發現有誤差或者施工有變化就很容易造成電纜
橋架的浪費。同時如果因為返廠重做，既增大電纜橋架成本，同時也耽誤施工工期，造成經濟損失。
三、臨時修改電纜橋架的制作。破壞了整體橋架的整體性，既不美觀，質量有所下降。

Problems existing in the installation of cable bridge
First, the towing arm of the cable bridge is usually realized in the way of household welding in the bridge plant. At present, the time of the inch of the earth is gold, which causes the storage of the welded bridge to occupy a large amount of area, and it can be improved invisibly.
The cost of cable tray is easy to cause damage during transportation and transportation.
Two. The cable bridge is set in the factory of the cable bridge, although it has been measured in the field before, but it is easy to cause the cable to cause the cable if there is an error in the field or the change in the construction.
The waste of the bridge. At the same time, if the factory is rebuilt, it will not only increase the cost of the cable tray, but also delay the construction period, resulting in economic losses.
Three. Temporarily amend the production of cable bridge. The integrity of the whole bridge is destroyed, which is neither beautiful nor quality.